39
Figure 30. Macro Editor – DAB Command
DAB Command – Select and left click from the COMMAND TYPE pull down to add DAB COMMANDS
to macros. DAB Commands control DAB functions such as: Power ON/OFF, Source Select, Volume,
Mute, Tuner Preset Select etc…The DAB has certain default programming, but these commands can
also be added to macros for whole-house control.
Function – Select and left click to define which DAB command is to be configured. i.e. Volume,
Source Select etc.
Zone – Select and left click to assign the DAB command to a particular zone, ZONE 1-6, a group of
zones (PARTY) or ALL ZONES.
Value – Select and left click to set the DAB command mode i.e. UP, DOWN, FLAT, ON, OFF etc.
Double click or drag and drop the DAB icon to add a DAB Command to the Macro List.
Figure 30 shows the DAB Command for All Zones OFF as used in the Double Press level on the
OFF button in Zone 1.
To Next Page
Loading...
