Sonance DAB1 - Repeat Steps and IR Toggle Commands

44
Figure 36. Macro Editor IR Toggle Command
Toggle IR Code – Select and left click from the COMMAND TYPE pull down to program a TOGGLE
IR CODE. Toggle IR Codes alternate their function every other time they are issued/received. Double
left click or drag the Toggle command into the Macro List. Drag the command into the Toggle
‘bracket’. Release mouse button. The command will attach to the Toggle bracket.
Using the IR Library
The DAB1 Program Manager comes with an extensive IR Code Library consisting of thousands of IR
commands for most brands and components that would likely be used in a whole house audio system.
On occasion, there may be a particular component or command that is not in the library. IR commands
can be added in two ways. One is to learn the command and add it to the IR Library Manager. The other
is to import codes from the RTI Internet Command Library.
NOTE: The MASTER IR LIBRARY cannot be opened directly. To use the MASTER IR LIBRARY
commands in PROGRAM MANGER, a NEW LIBRARY must be created. (This preserves a clean copy of
the Master IR Library in case codes get deleted or improperly edited.)
To create a NEW LIBRARY:
1. With DAB Program Manager Running, Select LIBRARY in the PROGRAM MANAGER menu bar.
2. Select and left click IR LIBRARY MANAGER from the pull down. The Infrared Library Manger
Window will open.
3. Select and left click FILE in the IR LIBRARY menu bar.
4. Select and left click NEW in the FILE pull down. The CREATE IR LIBRARY Window will open. The
COMMAND LIBRARIES Folder should be open in the SAVE IN window.
5. Enter a meaningful name, (Master Copy, IR Command Library, etc) in the FILE NAME text block.
6. Click SAVE. The Create IR Library Window will close and the new Folder will appear in the window
on the left side of Library Manager.
7. Select and left click REMOTE in the Infrared Library Manager Menu bar.
8. Select and left click IMPORT from the Remote pull down. The IMPORT FROM IR LIBRARY Window
will open.