Sonance DAB1 - Page 63

62
Command Syntax Parameters State Comments
Zone Power :Zxy<cr> x=Zone 1-6 y=State 1=On, 0=Off
Discrete Zone
Setting
All Zones
Off
:Zy<cr> y=State 1=On, 0=Off
Global Setting
Only
Source
Select
:Sxy<cr>
x=Zone 1-6
y=Source 1-4
Adjustable
Discrete Zone
Setting
Tuner
Memory
:Ryy<cr> yy=Memory 1-12
Memory
Preset #
Global Setting
Only
Band Select :Ny<cr> y=State
1=FM,
0=AM
Global Setting
Only
Volume :Vxyy<cr>
x=Zone 1-6 yy=Vol 0
to 60
Adjustable
Discrete Zone
Setting
Volume
Step
:Vx++
<cr>
or
:Vx--<cr>
++ = increase
-- = decrease Adjustable
Discrete Zone
Setting
Page
Volume
:Gxyy
<cr>
x=Zone 1-6 yy=Vol 0
to 60
Adjustable
Discrete Zone
Setting
Page
Volume
Step
:Gx++<cr>
or
:Gx--<cr>
++ = increase
-- = decrease Adjustable
Discrete Zone
Setting
Mute :Mxy<cr>
x=Zone 1-6
y=State
1=Mute On
0=Mute Off
Discrete Zone
Setting
Balance :Bxyyy<cr>
x=Zone 1-6
yyy=Bal -10 through
+10
Adjustable
Center=0
Discrete Zone
Setting
Balance
Bump Step
:Bx++<cr>
or
:Bx--<cr>
++ = increase
-- = decrease Adjustable
Discrete Zone
Setting
Bass :Lxyy<cr>
x=Zone 1-6
yyy=Bass -8 through
+8
Adjustable
Flat=0
Discrete Zone
Setting
Bass Bump
Step
:Lx--<cr>
or
:Lx++<cr>
++ = increase
-- = decrease Adjustable
Discrete Zone
Setting
Treble :Hxyy<cr>
x=Zone 1-6
yy=Treble -8 through
+8
Adjustable
Flat=0
Discrete Zone
Setting
Treble
Bump Step
:Hx--
<cr>
or
:Hx++<cr>
++ = increase
-- = decrease Adjustable
Discrete Zone
Setting
After each command is received, the DAB will respond with +OK if the command is recognized and
executed, or +ERR if the command is invalid. Note that even valid commands (such as volume controls,
etc) will return +ERR if the DAB is not able to process them (e.g. it is turned off).