▲
!
WARNING Electrical Grounding Instructions
This appliance (rotisserie motor) is equipped with a three-prong (grounding)
plug for your protection against shock hazard and should be plugged directly
into a properly grounded three-prong receptacle. Do not cut or remove the
grounding prong from this plug.
The light bulb in your grill will need to be replaced ocassionally.
Only use the
light bulb supplied with the grill or a replacement lamp specified by the
manufacture.
▲
!
WARNING
Always unplug light cord when not in use.
▲
!
WARNING
Do Not use grill light in the rain.
Light bulb replacement instructions:
1. Unplug the light electrical cord.
2. Open the lid, remove the self-tapping screw holding
the glass cover in place.
3. Remove glass cover and light bulb.
4. Reinstall the new light bulb, glass cover and screw.
Grill Light Maintenance
19
1. Feed electrical cord through access hole in back of the cart.
2. Plug into 3 prong GFCI protected outlet.
3. Turn on using light switch on front control panel.
4. Unplug electrical cord after use.
To Next Page
Loading...
