SONOS USER GUIDE
What you need
•Masking tape
• Pointed tool (like an awl)
• Phillips head screw driver
• Power drill with Phillips head attachment
Note: There are 2 spare screws (and anchors) included in the kit. Use these to provide additional
reinforcement if you’d like.
1. Tape the template to the wall above or below your TV. Use a level.
2. Use a pointed tool to pierce through the template and mark the mounting holes. Mark closer to the
corners of the holes.
3. Remove the template.
For best audio performance,
orient the connector panel
AWAY from the TV.
1" (25mm)
2" (50mm)
To Next Page
Loading...
