SONOS USER GUIDE
4. Drill pilot holes.
Wall mounting information
5. Insert and secure the wall anchors (don’t use the anchors if drilling into wood).
6. Place the bracket on the wall and loosely tighten the screws to secure the bracket. Check with a level and
then tighten the screws.
Wall Material Pre Drill Use Wall Anchors Use Screws
Wood Stud 1/8" (3 mm) bit
No Yes
Drywall (no stud) 3/16" (4.5 mm) bit Yes Yes
Hard wallboard or double board 3/16" (4.5 mm) bit Yes Yes
Plaster 1/4" (6.5 mm) bit Yes Yes
Concrete or Brick 1/8" (3 mm) bit Yes Yes
To Next Page
Loading...
