Sonos ZoneBridge Setup Guide
4
Adding To EXISTING Sonos System
If you are adding this ZoneBridge to an existing Sonos system, please follow the steps
below. If you are setting up a new Sonos Digital Music System, please turn to page 6
instead.
Use a Sonos ZoneBridge to replace the ZonePlayer™ that is currently wired to your
home network, or place a ZoneBridge in any location to extend the wireless range of
your Sonos Digital Music System.
Attach the power adapter and plug in the ZoneBridge. Be sure it is the proper
power adapter for your country.
If you are making a wired connection, connect a standard Ethernet cable. If you
are making a wireless connection, skip this step and continue.
Insert the System Setup CD-ROM packaged with your ZoneBridge, and follow
the prompts to update your Sonos system.
Choose one of the following options:
•Use the Desktop Controller software to add the ZoneBridge to your music system
by selecting Add a ZonePlayer or ZoneBridge from the Zones menu.
Important: If you are replacing the wired ZonePlayer in your music
system with a Sonos ZoneBridge, first add the new ZoneBridge to your
music system (steps below). You can then unplug the wired ZonePlayer,
replace it with the Sonos ZoneBridge, and move the original ZonePlayer
to a new location.
1
2
3
Viper Book.book Page 4 Friday, June 29, 2007 5:01 PM
To Next Page
Loading...
