Sonostar CProbe - 1.2 TECHNICAL PARAMETERS; 1.4 PRECAUTIONS & WARNINGS

2
Keep dry
IPX5
Prevent the water from the nozzle from invading in all directions and cause damage to
the electrical apparatus.
1.2 TECHNICAL PARAMETERS
Display: iPad / iPhone Series
Gray Scale: 256 levels
Battery last: > 3 hours
Size: 104mm x 50mm x 22mm
Weight: ≈308g
Operations
Storage and Transportation
Relative Humidity
25% to 80%,
non-condensi
ng
25% to 93%, non-condensing
Ambient Temperature
5°C to +40°C
-20°C to +55°C
Atmospheric Pressure
700hPa to
1060hPa
700hPa to 1060hPa
Electronic:
Input:5Vd.c. 1A
Battery Capacity：modle（SNP-4200） 3.8Vd.c. 4200mAh
continuous working time： 2hour
Waterproof: IPX5
1.3 INDICATIONS FOR USE
The Wireless Probe Type Ultrasound Scanner (Model: CProbe) is intended for diagnostic ultrasound
echo imaging, measurement, and analysis of the human body for general clinical applications
including obstetrics (OB), gynecology (GY) and general (abdominal) imaging.
1.4PRECAUTIONS & WARNINGS
 PRECAUTION 1: Read the user manual carefully before operating the device, be familiar with
the equipment and operation procedures, and strictly implement; the company is not
responsible for the damage caused by the improper use of the machine and the resulting
potential adverse consequences;
 PRECAUTION 2: The instrument must work in a clean environment, should avoid direct sunlight,
extreme temperature changes, dust, near heat sources, high humidity places, do not place
anything on top of the instrument.
 PRECAUTION 3: The device shall be operated in undisturbed conditions so as to avoid data
transmission interruption.
 PRECAUTION 4: When there is wireless channel congestion, switch the channel (Refer to
Section 3.6 SETTINGS), and then restart the probe.
 PRECAUTION 5: Prescription Use. The device shall be operated by professional physicians.
 PRECAUTION 6: The device shall be repaired by professional recognized by the manufacturer.