Sony Ericsson 910i - Creating and Editing Contacts

104 Contacts
This is the Internet version of the user’s guide. © Print only for private use.
– Select or the URL to open a Web page.
– Select to send a multimedia message.
– Select to send a text message.
Using service and information numbers
To call an Information number or Service number on the SIM
card
1. Select SIM in the folders menu.
2. Select
Contacts > Information numbers / Service numbers and
select a phone number or select a sub-category and then a
phone number.
3. Select Call .
Creating and editing contacts
You can sort the contacts according to first name, last name or
company. The contact entries can also be filtered by folder, such
as Business or Personal .
To create a new contact
1. Select Contacts > New .
2. Enter the desired information. When applicable, select from
the drop-down menus.
To add a field to a contact
1. Select the contact.
2. Select
Edit > Edit contact.
3. Select Edit > Add field.
4. Select the field to be added from the drop-down list.
5. Select Add.
To add a DTMF tone sequence
1. Select a field and set it to
Phone (h) .
Add a new field if necessary.
2. Enter a p and then the tone digits. Enter a p to insert a pause.
It is necessary to start the tone sequence with a p so the
phone recognises it as a tone sequence.
To send a DTMF tone sequence during a call
1. During a call, open the contact’s detail view.
2. Tap at the tone sequence.
Read more about DTMF tones in ‘Controlling tone-based
services’ on page 49.
To add a voice dialling command
Contacts with a voice dialling command are shown in
Voice
commands in the folders menu.
1. Select at the bottom of the screen.
2. Select a number.