Sony 480p - Audio Connection Notes and Hints; Audio Settings and Connection Advice

31
Hookups
Audio connection (pages 23 to 26)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 91).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 91).
• Set “DIGITAL OUT” to “ON” (page 91).
• Set “DISTANCE,” “BALANCE,” and
“LEVEL” according to the connected
speakers (page 92).
z Hints
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 90).
• For connections
Set “48kHz/96kHz PCM” to “96kHZ/24bit” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 91).
A
B-1
C-1
B-2 C-2 D-2
D-1
B-1 C-1 D-1
B-2 C-2 D-2