ILCE-7M3
4-732-950-11(1)
GB
37
Shooting
C:\4732950111\4732950111ILCE7M3UC2\01GB-ILCE7M3UC2\030BAS.indd
DTP data saved: 2017/11/01 09:29
PDF file created: 2017/11/01 09:36
Examples of the focusing frame display
The focusing frame differs as follows.
When focusing on a larger area
When focusing on a smaller area
• When [Focus Area] is set to [Wide] or [Zone], the focusing frame may
switch between “When focusing on a larger area” and “When focusing
on a smaller area” depending on the subject or situation.
• When you attach an A-mount lens with a Mount Adaptor
(LA-EA1 or LA-EA3) (sold separately) and [
AF System] is set to
[Phase Detection AF], the focusing frame for “When focusing on a
smaller area” may be displayed.
When focus is achieved automatically based on the whole range of the
monitor
• When you use a zoom function other than the optical zoom, the
[Focus Area] setting is disabled and the focusing frame is shown by the
dotted line. The AF operates with priority on and around the center area.
To Next Page
Loading...
