ILCE-7M3
4-732-950-11(1)
GB
38
C:\4732950111\4732950111ILCE7M3UC2\01GB-ILCE7M3UC2\030BAS.indd
DTP data saved: 2017/11/01 09:29
PDF file created: 2017/11/01 09:36
To move the focus area
• You can move the focus area in [Flexible Spot], [Expand Flexible Spot], or
[Zone] by operating the multi-selector. If you assign [Focus Standard] to
the center of the multi-selector beforehand, you can move the focusing
frame back to the center of the monitor by pressing the center of the
multi-selector.
• You can move the focusing frame quickly by touching and dragging it
on the monitor. Set [Touch Operation] to [On] beforehand (page43).
Hint
• In the default settings, [Focus Area] is assigned to the C2 button.
Note
• [Focus Area] is locked to [Wide] in the following situations:
– [Intelligent Auto]
– [Scene Selection]
• The focus area may not light up during continuous shooting or when the
shutter button is pressed all the way down at once.
• When the mode dial is set to
(Movie) or , or during movie shooting,
[Lock-on AF] cannot be selected as the [Focus Area].
To Next Page
Loading...
