Interchangeable Lens Digital Camera
ILCE-7/ILCE-7R
AF Micro Adj.
Allows you to adjust and register an autofocused position for each lens, when using an A-mount lens with the
Mount Adaptor LA-EA2 or LA-EA4 (sold separately).
1. Select MENU → (Custom Settings) → [AF Micro Adj.].
2. Select [AF Adjustment Set.] → [On].
3. [amount] → desired value.
You can select a value between −20 and +20. Selecting a positive value shifts the autofocused position
away from the product. Selecting a negative value shifts the autofocused position closer to the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered value appears on the
screen. [±0] appears for lenses for which a value has not yet been registered.
If [−] is displayed as the value, then a total of 30 lenses have been registered and no new lens can be
registered. To register a new lens, attach a lens for which the registration can be erased, and set its value to
[±0], or reset the values of all the lenses using [Clear].
Use [AF Micro Adj.] with Sony, Minolta, and Konica-Minolta lenses only. If you use [AF Micro Adj.] with other
brands of lenses, the registered value may be affected. Do not perform [AF Micro Adj.] with an unsupported
lens.
You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konica-Minolta lens of the same
specification.
Notes on use
4-484-060-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
