GB
18
Functions list
Operating the camera
• You can use the up/down/left/right side of the multi-selector to move the
selection frame. Press z in the center of the multi-selector to set the
selected item. In this manual, the up/down/left/right side of the multi-
selector is indicated by v/V/b/B.
• When you use b/B on the multi-selector in playback mode, you can
display the previous or next image.
• [Standard] is assigned to z in the center of the multi-selector in the
default settings. When you press z, the autofocus function is activated
and the camera focuses on the subjects in the central area of the monitor.
You can turn the front dial or rear dial to change the settings required for
each shooting mode with immediate effect.
How to use the multi-selector
How to use the front dial/rear dial
To Next Page
Loading...
