Name: Sony Alpha NEX-6
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

107

Table of

contents

Sample photo Menu Index

1 MENU t [Brightness/Color] t [White Balance] t [Custom Setup].

2 Hold the camera so that the white area fully covers the AF area located in

the center, and then press the shutter button down.

The shutter clicks and the calibrated values (color temperature and color filter) are displayed.

3 To call the custom white balance setting, MENU t [Brightness/Color] t

[White Balance] t [Custom].

You can finely adjust the color temperature with OPTION.

• If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash

light taken into account. Take pictures with the flash in later shootings.

• The message “Custom WB Error” indicates that the value is beyond the expected range, when the flash is

used on a subject in close proximity or a subject with a bright color is in the frame. If you register this

value, the indicator turns yellow on the recording information display. You can shoot at this point,

but it is recommended that you set the white balance again to get a more accurate white balance value.

Custom White Balance

Notes

Questions and Answers:

Need help?

Do you have a question about the Sony Alpha NEX-6 and is the answer not in the manual?

Sony Alpha NEX-6 Specifications

General