115
Adjusting the focus
Shooting (Advanced operations)
You can enhance the outline of in-focus ranges with a specific color in
manual focus. This function allows you to confirm the focus easily.
MENU button t 2 t [Peaking Level] t Select the desired
setting
Notes
• Since the camera judges that sharp areas are in focus, the peaking level is different,
depending on the subject, shooting situation, or on the lens used.
• The outline of in-focus ranges is not enhanced when the camera is connected using
an HDMI cable.
To set the color of the peaking function
You can set the color used for the peaking function in manual focus.
MENU button t 2 t [Peaking Color] t Select the desired
setting
Note
• This item cannot be set when [Peaking Level] is set to [Off].
You can check the focus by enlarging the image before shooting.
Peaking
Focus Magnifier
1 MENU button t 3 t [Smart Telecon. Button] t [Focus
Magnifier]
2 Press the Focus Magnifier button.
Focus Magnifier button
To Next Page
