EasyManua.ls Logo

Sony BDP-N460 - Page 44

Sony BDP-N460
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Selects the display configuration for
playback
of
16:9 screen pictures on a 4:3
screen
TV
(effective when "TV
Type"
is set
to
"4:3"
and
"Screen
Format"
is set to "Fixed
Aspect Ratio").
Letter Box
Displays a wide picture with
black bands
on
the top and
bottom.
Pan & Scan
Displays a full-height
picture on the entire screen,
with trimmed sides.
Letter Box
Pan
&
Scan
'.
,
~:---'
:
~
~.
~
'-----_
.....
"
Depending
on
the
DVD, "Letter
Box"
may
be
selected automatically instead of
"Pan
& Scan" or
vice
versa.
Sets the video conversion method for 480p,
nop,
1080i,
or
1080p*
signals from the
HDMI
OUT
jack
or
the
COMPONENT
VIDEO
OUT
jacks.
*
HDMI
only
Auto
Normally select this. The
--
player automatically detects
whether the material
is
video-based or film-based,
and switches
to
the
appropriate conversion
method.
Video
The conversion method
suited for video-based
material will always be
selected regardless
of
the
material.
Selects the
jack
type to output video signals
("TV
Connection
Method")
and output
resolution
("HDMI
Resolution"I"Component
Resolution").
1 Select
"Output
Video
Format"
in "Screen
Settings," and press ENTER.
2 Select the
jack
type to output video
signals using
t/.,
and press ENTER.
"
When
connecting
the
HDMI
OUT jack
and
other
video
output jacks
at
the
same
time,
select "Component Video."
TV
Connection
Method
HOMI
Outputs signals from
the HDMI OUT jack
according
to
the "HDMI
Resolution" setting
(page 45).
Component Outputs signals from
Video the COMPONENT
VIDEO OUT jacks
according
to
the
"Component
Resolution" setting
(page 45).
Video Outputs signals from
--
the LINE OUT VIDEO
jack.
3 (When you select
"HDMI"
or
"Component
Video"
only)
G)
Select the signal type for the
HDMI
OUT
jack
or
COMPONENT
VIDEO
OUT
jacks
using
t/.,
and
press
ENTER.
When
you change the video output
resolution, the test screen appears for
about
30
seconds.
"
If
no
picture appears, press
RETURN
to
return
to
the
previous screen,
and
change
the
resolution setting.
®Select
"Finish," and press
ENTER.
The
display asks for confirmation.

Table of Contents