16
Step 4: Easy Setup
1 Insert two R6 (size AA) batteries
by matching the 3 and # ends on
the batteries to the markings
inside the battery compartment.
2 Plug the player into the mains.
3 Press [/1 to turn on the player.
4 Turn on the TV and set the input
selector on your TV. This will
show the signal from the player
on your TV screen.
5 Perform [Easy Initial Settings].
Follow the on-screen instructions to
make the basic settings using
</M/m/, and ENTER on the
remote.
b
When [Easy Initial Settings] is complete,
select [Easy Network Settings] to use the
network functions of the player.
When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
to mains
ENTER
</M/m/,
To Next Page
Loading...
