EasyManua.ls Logo

Sony BDP-S490 - Audio Settings

Sony BDP-S490
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
x [Cinema Conversion Mode]
[Auto]: Normally select this. The player
automatically detects whether the
material is video-based or film-based,
and switches to the appropriate
conversion method.
[Video]: The conversion method suited
for video-based material will always be
selected regardless of the material.
x [Output Video Format]
[HDMI]: Normally select [Auto]. Select
[Original Resolution] to output the
resolution recorded on the disc. When
the resolution is lower than the SD
resolution, it is scaled up to the SD
resolution.
[Video]: Automatically sets the lowest
resolution.
x [BD-ROM 24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz
video signals only when connecting a
1080/24p-compatible TV using the
HDMI OUT jack.
[On]: Turns on the function.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x [DVD-ROM 24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz
video signals only when connecting a
1080/24p-compatible TV using the
HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the
connected TV type, and switches to the
matching colour setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Outputs RGB video signals.
x [HDMI Deep Colour Output]
[Auto]: Normally select this.
[16bit]/[12bit]/[10bit]: Outputs 16bit/
12bit/10bit video signals when the
connected TV is compatible with Deep
Colour.
[Off]: Select this when the picture is
unstable or colours appear unnatural.
x [Pause Mode]
[Auto]: Normally select this. Dynamic
moving pictures appear without blurring.
[Frame]: Displays static pictures at high
resolution.
[Audio Settings]
x [Audio (HDMI)]
[Auto]: Normally select this. Outputs
audio signals according to the status of
the connected HDMI device.
[PCM]: Outputs PCM signals from the
HDMI OUT jack.
x [DSD Output Mode]
[On]: Outputs DSD signals from the
HDMI OUT jack when playing a Super
Audio CD. When [On] is selected, no
signal is output from other jacks.
[Off]: Outputs PCM signals from the
HDMI OUT jack when playing a Super
Audio CD.

Other manuals for Sony BDP-S490

Related product manuals