Sony BDP-S490 - BD;DVD Viewing Settings

27
Settings and Adjustments
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by
mixing the interactive and secondary
audio to the primary audio.
[Off]: Outputs the primary audio only.
Select this to output HD audio signals to
an AV amplifier (receiver).
x [Dolby Digital / DTS]
[Downmix PCM]: Converts to output
Linear PCM signals. Select this when
connecting an audio device without a
built-in Dolby Digital or DTS decoder.
[Bitstream]: Select this when connecting
an audio device with a built-in Dolby
Digital or DTS decoder.
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the
simulated multi-channel sound from 2
channel sources via the HDMI OUT jack
according to the capability of the
connected device using DTS Neo:6
Cinema or DTS Neo:6 Music mode.
[Off]: Outputs the sound with its original
number of channels via the HDMI OUT
jack.
x [Audio DRC]
[Auto]: Performs playback at the
dynamic range specified by the disc
(BD-ROM only). Other discs are played
back at the [On] level.
[On]: Performs playback at a standard
compression level.
[Off]: No compression works. A more
dynamic sound is produced.
x [Downmix]
[Surround]: Outputs audio signals with
surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS
Neo:6.
[Stereo]: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS Neo:6.
[BD/DVD Viewing
Settings]
x [BD/DVD Menu Language]
Selects the default menu language for
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and
enter the code for your language,
referring to
“Language code list”
(page 38).
x [Audio Language]
Selects the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the
language given priority in the disc is
selected.
Select [Select Language Code], and
enter the code for your language,
referring to
“Language code list”
(page 38).
x [Subtitle Language]
Selects the default subtitle language for
BD-ROMs or DVD VIDEOs.
Select [Select Language Code], and
enter the code for your language,
referring to
“Language code list”
(page 38).
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.