Sony BDP-S490 - Network Settings

29
Settings and Adjustments
z
For details, refer to the instruction manual
supplied with the TV or components.
x [HDMI:Linked to TV-off]
[On]: Automatically turns off the player
and HDMI-compatible components
when the connected TV enters standby
mode (BRAVIA Sync).
[Off]: Turns off the function.
x [Quick Start Mode]
[On]: Shortens the startup time when
turning on the player.
[Off]: Reduces standby power
consumption.
x [Auto Standby]
[On]: Automatically returns to standby
mode if no button is pressed for more
than 30 minutes.
[Off]: Turns off the function.
x [Auto Display]
[On]: Automatically displays
information on the screen when
changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when
you press DISPLAY.
x [Screen Saver]
[On]: Turns on the screen saver function.
The screen saver image appears when
you do not use the player for more than
10 minutes while an on-screen display is
displayed.
[Off]: Turns off the function.
x [Software Update Notification]
[On]: Sets the player to inform you of
newer software version information
(page 25).
[Off]: Turns off the function.
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when disc playback stops.
Connect to the network for
downloading.
[Manual]: Downloads the disc
information when [Video Search] or
[Music Search] is selected.
x [System Information]
Displays the player’s software version
information and the MAC address.
x [Software License Information]
Displays information about the Software
License.
[Network Settings]
x [Internet Settings]
Connect the player to the network
beforehand. For details, see
“Step 3:
Preparing for Network Connection”
(page 15).
[Wired Setup]: Select this when you
connect to a broadband router using a
LAN cable.
[Wireless Setup(built-in)] (BDP-S590
only): Select this when you use the
wireless LAN that is built into the player
for wireless network connection.
[USB Wireless Setup] (BDP-S490
only): Select this when you use a USB
Wireless LAN Adapter for wireless
network connection.
[View Network Status]: Displays the
current network status.