16
GB
Getting Started
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Before installing the front and surround speakers on a wall, you need to disassemble the speakers. You
can install the upper part of a speaker on a wall.
To disassemble the speaker
1 Disconnect the speaker cords from the speaker.
2 Remove the screw (pre-installed) at the rear of the speaker.
This screw is used when reassembling the speaker. Be sure not to lose the screw.
Installing the speakers on a wall
Rear of the speaker
Rear of the speaker
Screw
To Next Page
Loading...
