54
GB
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive the Dolby Digital signal, you need to
connect a TV or other component to the unit with an
optical or coaxial digital cord (pages 24, 25) and set
the digital output mode of the TV or other component
to Dolby Digital.
Press repeatedly until the desired
signal appears in the front panel display.
•“MAIN”: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN/SUB”: Mixed sound of both the main
and sub languages will be output.
Using the Sound Effect
You can reinforce bass frequencies.
Press DYNAMIC BASS.
“D. BASS ON” appears in the front panel
display and bass frequencies are effectively
reinforced.
During this mode is on, “BASS” lights up in the
front panel display.
To turn off the sound effect
Press DYNAMIC BASS so that “BASS”
disappears from the front panel display.
321
654
987
0
Reinforcing bass frequencies
321
654
987
0
C/X/x/c,
DYNAMIC
BASS
SYSTEM
MENU
NIGHT
To Next Page
Loading...
