Settings and Adjustments
masterpage:Right
specdef v20070110
filename[I:\FM E_data\850138S_BDV-Z2\0527_data
up\4136891111\4136891111BDVZ7AEP\02-BDVZ7AEP\gb10set.fm]
model name [BDV-Z7_GB]
[4-136-891-11(1)]
71
GB
[Speaker priority]: Outputs multi-channel sound
from the system’s speakers and 2-channel linear
PCM signals from the HDMI OUT jack.
[HDMI priority]: Outputs 2-channel stereo
sound from the system’s speakers, and enables
sound output from the HDMI OUT jack. Sound
format from the HDMI OUT jack depends on
the connected component.
Note
• When you set [BD/DVD Audio Output] to [HDMI
priority], a confirmation message appears on the TV
screen. Press C/c to select [OK] to complete the
setup.
• When you set [BD/DVD Audio Output] to [HDMI
priority], “DEC. MODE,” NIGHT, SOUND MODE,
“TONE,” and DYNAMIC BASS functions are
disabled.
• When the System Audio Control function (page 59)
is activated, this setting may change automatically.
x [Sound Effect]
You can set the system’s sound effects (“DEC.
MODE,” NIGHT, SOUND MODE, “TONE,”
DYNAMIC BASS)
to on/off.
[On]: Enables all of the system’s sound effects.
The upper limit of sampling frequency is set to
48 kHz.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling frequency.
Note
• In DTS96/24 format, some sound effects do not work
even if you set [Sound Effect] to [On].
x [Speaker Settings]
To obtain the best possible sound, set the
speakers. For details, see “Setting the Speakers”
(page 60).
[BD/DVD Viewing
Settings]
You can make detailed settings for BD/DVD
playback.
x [BD/DVD Menu]
You can select the default menu language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
“Language Code List” (page 93).
x [Audio]
You can select the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given
priority in the disc is selected.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
“Language Code List” (page 93).
x [Subtitle]
You can select the default subtitle language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
“Language Code List” (page 93).
x [BD Parental Control]
Playback of some BD-ROMs can be limited
according to the age of the users. Scenes may be
blocked or replaced with different scenes.
1 Enter your four-digit password using
the number buttons.
2 Press X/x to select [OK], then press
.
3 Press X/x to select the age restriction,
then press .
The lower the value, the stricter the
limitation.
If you select [Select Age Restriction], you
can enter the age restriction level from [0]
To Next Page
