Sony BVS-3100P - Process Unit 2; Console Unit; Removing the Boards; Process Unit

2-4. REMOVING THE BOARDS 2-4-2. Console unit
2-4-1. Process Unit (1) Remove the lower panel.
(1) Removing/Installing the Boards (Cards)
The boards can be removed by pushing the
board levers in the direction of the *
arrow and pulling the door toward your-
self.
Insert the boards parallel to the board
lever guides and the board guides. The
boards can be installed by closing the
board levers in the direction of the **
arrow while inserting the boards into the
holes in the left and right of the unit.
(2) Remove the Fader grip A and B, and
sixteen valume knobs.
volume knob
(2) Removing CN-289, CN-290 and CN-291
Board.
Remove the screws that have been attach-
ed and pull them out towards yourself.
CN-291board %y
BVS - 3100 (UC)
BVS -3100P (EK)