Sony BVS-3100P - Board

S5: KEY PROCESSOR ADJ A/B switch
This switch is used when making
adjustments to the key processor
section.
A: during normal operations.
B: during adjustment.
S6: BKGD COLOR ADJ ON/OFF switch
This switch is used when adjusting
the chroma for the background color.
ON: during adjustment.
OFF: during normal operations.
S7: EFFECT MATTE COLOR (OVER) ADJ ON/OFF
switch
This switch is used when adjusting
the chroma for the matte color (over).
ON: during adjustment.
OFF: during normal operations.
S8: EFFECT MATTE COLOR (UNDER) ADJ ON/OFF
switch
This switch is used when adjusting
the chroma for the matte color (under).
ON: during adjustment.
OFF: during normal operations.
S9: FTB ADJ/CONT switch
This switch is used when making
adjustments to the fade to black
section.
ADJ: during adjustment.
CONT: during normal operations.
S10: FTB Y/(R/B) switch
This switch is used to select the
conditions for replacing the blank-
ing interval for the color differ-
ence signals.
Y: Replacement on/off is selected
using S4 in the same manner as
with the Y signal.
R-B: The blanking interval for the
color difference signals is
replaced regardless of the
setting of S4.
Factory settings
1-5-2. SD-20 Board
« S500:
- S601:
- S602:
- $603:
O
(J se01
C] s602
[_] $603
$801 S804 $810 $805
OO*eohefhehe
$604 RV802 RV809 RV803 RV810
SD-20 board
DSK MATTE COLOR ADJ ON/OFF switch
This switch is used to adjust the
DSK color chroma.
ON: during adjustment.
OFF: during normal operations.
CHROMA KEY DELAY select switch
This switch is used to adjust the
delay for the chroma key signal.
CHROMA KEY DELAY select switch
This switch is used to adjust the
delay for the chroma key signal.
CHROMA KEY DELAY select switch
This switch is used to adjust the
delay for the chroma key signal.
The relationship between the switch-
es and the delay for the chroma key
signal.
BVS-3100P (EK)