Sony BVS-3100P - Space Requirements for Installation; Power Supply; Setting the System Select Switches

1-3. SPACE REQUIREMENTS FOR INSTALLATION 1-4. POWER SUPPLY
If the unit is to be installed in a - Since the power supply for the BVS-3100
console, be sure to cut a hole in the utilizes a switching regulator (+5V,
console of the dimensions given in one of +9.5V, +15V, and + 9V), the unit can be
the diagrams below. operated without modification on any
power supply in the 220V + 10% range.
Type A
console unit
1-5. SETTING THE SYSTEM SELECT SWITCHES
- The select switches on all PC boards are
described in the pages that follow. Since
the select switches should be set accord-
ing to operational requirements and the
type of system desired, be sure to set
them accordingly.
Type B
console unit
BVS -3100P (EK)