Sony CDP-C211 - Disc and Selection Navigation; Selecting a Specific Disc; Locating Selections and Points

SY = (=Toad late Mr-im BI-t-J1a-10 fm B) [101
By using the DISC 1 to 5 buttons or the DISC SKIP button
during play, you can locate the beginning of any disc.
To select a particular disc Press the corresponding
DISC 1 to 5 button.
To move to the disc tray Press DISC SKIP button.
next to the current one
Locating a Particular Selection
Locating a selection in sequence (Automatic Music
Sensor)
You can locate the beginning of a selection on the disc
being played.
To locate the beginning of Press <4 once.
the selection being played
To locate the beginning of Press Pf once.
the next selection
Continue to press until the selection you want is located.
CDP-C315 only
Locating a Particular Point in a
Selection
Locating a point in sequence (Manual Search)
You can locate a particular point in a selection during play
by monitoring the high-speed sound.
To go back at high speed Keep <4<@ pressed.
To go ahead at high speed | Keep PP pressed.
Release the button when you reach the point in the
selection you want.
To locate at higher speed
Press <4<4 or BP in the pause mode. Search speed will
increase three times, but there will be no sound. Find the
desired point by watching the number in the display.
10