Sony CDP-C211 - Tape Editing Features; Fading In and Fading Out; Time Fade for Duration

Bilel-mrolamm elidiale Mm m-)el=1~
The following functions are convenient for editing your own
tapes.
arzLe liar Mm lavaar-Cellalemmelens
(ole) mes EMeolal ia a |
You can have the play fade in and fade out between 2-10
seconds.
When no time is specified, the play will fade in and fade
out for 5 seconds.
To set the fade time
1 Press &.
2 Press FADER.
3 Press <<4/® to select fade time between 2-10
seconds.
To end the play fading out
Press FADER when you want to start fading out.
{we} flashes in the window, and play fades out and unit
enters the pause mode.
To restart the play fading in
Press FADER in the pause mode.
(Su) flashes in the window, and play fades in.
arcojjaemolehar-)ac-lar-MelstJ[a-r0| :
duration - Time Fade ie
You can have the play fade out at the end by designating
the play duration. Once time fade is set, it functions twice
for editing both sides of a tape. You can change discs
without canceling this function. The fade time is preset to
5 seconds, but CDP-C315 can change it between 2-10
seconds.
To set time fade
1 Press EDIT/TIME FADE twice during stop.
five rave Jis displayed in the window.
2 Set the desired play duration, using 4<4/PP§ and
<<4/PP buttons.
¢ To set the minute
Each time you press i4<4/ PI, the display changes in
the following way.
Press Id
C C-90 (45.00 min.)
Press PPI
C-46 (23.00 min.)
C-74 (37.00 min.) — C-60 (30.00 min.) — C-54 (27.00 min.) a
¢ To set the second
Each time you press <4<4/P, the seconds will be set
in 10 second shifts.
Note
The desired play duration can be set up to 59 minutes 50
seconds,
3 To start play, press .
After the designated time, play fades out and pauses.
Tape side B lights up. Press > or Bl to resume playing
for the other side of the tape. If you press FADER on
the remote commander, fade in will start (CDP-C315
only). When the play fades out for the second time, the
unit pauses and the time fade function is canceled.
When playback ends in the duration of time fade
Time fade function will be kept on. Change the disc and
start playback automatically, when the total playing time is
within some seconds before the designated time, the
player fades out.
To cancel time fade
Time fade will be canceled when
-EDIT/TIME FADE is pressed once again.
-<</>P (manual search) is pressed during play.
To display the time remaining until the time set
Press TIME twice
if the PEAK SEARCH is pressed after setting time
fade, time fade is released but peak search is kept active.