Sony CDP-C401 - Connecting and Preparing the CD Player; Connection Notes; Remote Commander Setup

Connecting the CD Player
Notes on Connection
* Turn off the power of each unit before making connections.
* Connect the AC power cord last.
* Be sure to insert the plugs firmly into the jacks. Loose connection may cause hum and noise.
¢ Leave a little slack in the connecting cord to allow for inadvertent shock or vibration.
¢ Cord plugs and jacks are color coded: Rod plugs and jacks are for the right channel (R) and white ones for the left
channel (L).
CDP-C500/C400/C44/C401
Speaker system
To AC outlet <j
Preparing the Remote Commander
installing Batteries
On battery life
* About half a year of normal operation can be expected
1 when using the Sony SUM-3(NS) batteries.
¢ When the batteries are run down, the remote
eer commander will not operate the unit. In this case,
replace both batteries with new ones.
Notes on the remote commander and remote control
operation
¢ Keep the commander away from extremely hot or humid
places.
2 ; e Avoid dropping any foreign objects into the commander
AAS casing, particularly when replacing the batteries.
batteries * Avoid exposing the remote sensor to direct sunlight or
lighting apparatus. Such exposure can cause a
malfunction.
¢ To avoid damage caused by battery leakage and
corrosion, remove the batteries when the commander
will not be used for a long time.