Sony CDP-CX225 - Section 3 Disassembly Procedures; 3-1. Front Panel Assembly Disassembly; 3-2. Back Panel Assembly Disassembly

— 9 —
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. FRONT PANEL ASSEMBLY
3 Two screws (BVTT 3x6)
2 Three screws (BVTT 3x6)
4 Flat type wire (CN601)
1 Connector
(CN501)
3 Five screws
(BVTT3x6)
4 Screw
(BVTP3x10)
2 Four screws (BVTT 3x6)
6 Back panel
5 Remove the PC board holder
3-2. BACK PANEL ASSEMBLY
7 Front panel assembly
1 Two screws
(BVTP 3x8)
6 Remove the claw
5 Remove the claw