Playing
Alternately (No-Delay
Play/X-Fade
Play)
Playing
CDs
3 Press
[>
to start playing.
The MEGA CONTROL
button
lights
up
while the
track in the second player is selected.
I I
=
@
tS?J
b
o 0 0 0 0
~
~'~~
o 0 0 0 0
CD
o
0000
0
Q
."
~
~
t=:=r
-.:::::::::::::
When you connect the second player,
you
can play
tracks in this player
and
those from the second player
alternately from any play mode (see "Connecting
Another CD Player"
on
page
6).
Select one of the following methods:
• No-Delay Play: The current player changes at each
track. Each time the current player changes to the
other player, the other player starts play without a
break in
sound
immediately after the current player
ends play. The other player skips the lead-in portion
and
starts playing from where the
sound
actually
begins.
• X-Fade Play: The current player changes at each
track or at the specified interval. You can select the
interval,
30,
60
or
90
seconds. Each time the current
player changes to the other player, the
sound
from
both players is mixed. The current player ends play
by fading out, and the other player starts play by
fading in.
X-FADE
NO
DELAY
To
cancel
No-Delay/X-Fade
Play
Press the corresponding button repeatedly until
"NO
DELAY"
or
"X-FADE" disappears from the display. The
current player continues playing.
'Q-
You
can
change
the method
(No-Delay
or
X-Fade)
during
play
Press the corresponding button (NO DELAY
or
X-FADE)
following the procedure in Step
2.
'Q-
You
can
start
X-Fade
at
any
point of the track
Press FADER
during
X-Fade Play.
Even after you have set the X-Fade
mode
and
started
X-Fade play, you can start X-Fade manually
at
any point
you like. Note
that
you cannot do this operation while
the
sound
from both players is mixed.
Notes
o The play starts from the second player
if
you start play
while the MEGA CONTROL button is
lit.
o When one player has played all the discs/ tracks in the
player ahead of the other player, the play stops.
o Do not use the controls
on
the second player
during
No-Delay
IX-Fade
Play. They may not
work
correctly.
Controlling the
Player
by
Another Unit
l>
1 Select the play mode you
want
on
each player.
2
When
you
select
No-Delay
Play
Press NO
DELAY.
"NO
DELAY" appears in the display.
When
you
select
X-Fade
Play
Press
X-FADE.
"X-FADE" appears in the display.
Each time you press the X-FADE button, the
indication appears as follows:
[X-FADE
off
-+
at track
end
--.:...
after
30
sec]
after
90
sec
+-
after
60
sec
+4
-----
To change the current player each time a whole
track
is
finished, select
"at
track end."
To change the current player at the specified
interval, press X-FADE repeatedly until the
interval you
want
appears in the display.
When you connect the player to a Sony MD deck
compatible with the Mega Control function
or
operate
a Sony MD deck by using the computer software like
"MD Editor," you
must
set the player as shown below:
1 Press MENU/ NO.
2
Turn
the JOG dial until "CONTROL
Al
?" appears
in the display window.
3 Press
YES.
To
return to normal setting
After
follOWing
steps 1 and
2,
and
"CONTROL
Al
n ?"
is
displayed, then press
YES.
Notes
o You can perform the operation above correctly only
when
you operate Disc 1 to Disc
200.
o You cannot operate this player correctly from another
player which does not have the CONTROL A1
II
jack. In
this case, operate the other player from this player.
To Next Page
Loading...
