Sony CDP-M205 - Recording From CDs; Recording Programmed Tracks to Tape

11
EN
Recording From CDs
Recording Your Own
Programme
You can record the programme you’ve created on a
tape. The programme can contain up to 24 tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
Number
buttons
PROGRAM
>10
P
(
1 Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 to 4 in “Creating Your Own
Programme” on page 9.
The
A
indication appears in the display.
2 When you record on both sides of the tape, press
P to insert a pause.
The “P” and “
A B
” indications appear in the
display and the playing time is reset to “0.00.”
When you record on one side of the tape, skip this
step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
3 Repeat Step 1 to create the programme for side B.
PROGRAM
·
(CDP-M305 only)
4 Start recording on the deck and then press · (()
on the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
5 When you record on side B, reverse the tape and
press · (() or P on the player to resume
playing.
To check and change your programme
See page 10.
The indication
A
appears while checking the
programme for side A and
B
while checking the
programme for side B. (CDP-M305 only)
When tracks, which aren’t numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
=/+
P
=/+