CDP-XB920/XB920E
AEP Model
CDP-XB920
UK Model
E Model
CDP-XB920E
SERVICE MANUAL
COMPACT DISC PLAYER
SPECIFICATIONS
Model Name Using Similar Mechanism CDP-XE900/XE900E
CD Mechanism Type CDM36C-14D
Base Unit Type BU-14D
Optical Pick-up Type KSS-213B/K-N
Photo : CDP-XB920
Compact disc player
Laser Semiconductor laser (λ = 780 nm)
Emission duration: continuous
Laser output Max 44.6 µW*
* This output is the value measured at
a distance of 200 mm from the
objective lens surface on the Optical
Pick-up block with 7 mm aperture.
Frequency response 2 Hz to 20 kHz ± 0.5 dB
Signal-to-noise ratio More than 113 dB
Dynamic range More than 99 dB
Harmonic distortion Less than 0.0025%
Channel separation More than 105 dB
General
Power requirements 220 V – 230 V AC, 50/60 Hz
Power consumption 15W
Dimensions (approx.) 430 × 115 × 290 mm
(w/h/d) (17 × 4 5/8 × 11 1/2 in.) incl.
projecting parts
Mass (approx.) 5.5 kg (12 lbs 2 oz)
Supplied accessories
Audio cord (2 phono plugs–2 phono plugs) (1)
Remote commander (remote) (1)
Sony SUM-3 (NS) batteries (2)
Stabilizer (1)
Design and specifications are subject to change without notice.
Outputs
Jack Maximum Load
type output impedance
level
LINE OUT Phono 2 V Over 50 kilohms
jacks (at 50 kilohms)
DIGITAL Optical –18 dBm Wave length:660nm
OUT output
(OPTICAL) connector
DIGITAL Coaxial 0.5 Vp-p 75 ohms
OUT output (at 75 ohms)
(COAXIAL) connector
PHONES Stereo 10 mW 32 ohms
(only for CDP-XB920, phone
CDP-XB820 and jack
CDP-XB720)
To Next Page
Need help?
General
