Need help?Do you have a question about the Sony CDP-XE510 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Channels | 2 |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Dynamic range | 98 dB |
| Total Harmonic Distortion | 0.003% |
| Digital Output | Coaxial |
| Power Consumption | 15W |
| Disc format | CD |
| Line output | 2V |
| Dimensions | 430 x 290 x 80 mm |
Guidelines for preventing electrostatic breakdown and handling the optical pick-up block and base unit with care.
Instructions for safely checking laser diode emission, emphasizing observation distance from the objective lens.
Details AF mode operations, including FL tube checks, remote commander functionality, and button input verification.
Explains operations in ADJ mode, focusing on servo adjustments and jitter value display modes.
Instructions for checking the symmetry and peak-to-peak level of the S-curve waveform using an oscilloscope.
Procedure to check E-F balance and waveform levels without using the remote commander.
Detailed schematic diagram for the BD (Base) circuit board, illustrating component connections and signal paths.
Comprehensive schematic diagram for the Main circuit board, detailing electrical connections and component interrelations.
Detailed schematic diagram for the Panel circuit board, illustrating the connections for buttons, display, and associated circuits.
Schematic diagram for the Loading and HP circuit boards, detailing motor control and headphone output connections.
To Next Page
