Do you have a question about the Sony CDP-XE530 and is the answer not in the manual?
Type | CD Player |
---|---|
Channels | 2 |
Frequency Response | 2 Hz - 20 kHz |
Dynamic range | 98 dB |
Channel separation | 100 dB |
Output | Line output |
Digital Output | Coaxial |
Output Voltage | 2 V |
Weight | 3.8kg |
Power Consumption | 15 W |
Disc format | CD |
Digital converter | 1-bit D/A converter |
Digital outputs | 1 |
Dimensions | 430 x 290 mm |
Line output | 2V RMS |
Details on power, dimensions, weight, and model name.
Information on audio output types, signal levels, and impedance.
Precautions for handling the optical pick-up block and flexible boards.
Guidance on checking laser diode emission and focus operation.
Identification and description of the player's front panel parts and controls.
Procedures for AF mode checks, including FL tube and remote commander tests.
Details on ADJ mode procedures, button operations, and key checks.
Instructions for entering and using the aging mode for mechanism checks.
Tests for checking the symmetry and peak-to-peak level of the S-curve.
Procedures for testing RF signal levels and E-F balance (1 track jump).
Diagram illustrating the placement of all circuit boards within the unit.
Circuit and wiring diagrams for the Loading Motor section.
Circuit and wiring diagrams for the BD section.
Circuit and wiring diagrams for the Display section.
Details on IC pin assignments and internal block diagrams.
Exploded view of the front panel, case, and associated hardware.
Exploded view of the CD mechanism (CDM14FL-5BD25).
Exploded view of the Base Unit (BU-5BD25) components.
List of components for the BD board, including capacitors, resistors, and ICs.
Parts list for Display, Headphone, Key, and Loading sections.
List of components for the Main board, including capacitors, diodes, and connectors.
Parts list for the Power SW board, hardware, and accessories.