CDX-GT61UMS/GT560UE/GT560UI/GT560US/GT564UI/GT610UG/GT610US/GT616UG
35
Pin No. Pin Name I/O Description
60 AMPSTB O Standby control signal output to the power amplifi er
61 NCO - Not used
62 VCC2 - Power supply terminal (+3.3V)
63 F_AUX_ATT O Muting on/off control signal output terminal Not used
64 VSS - Ground terminal
65 to 80 NCO - Not used
81, 82 RE-IN1
, RE-IN0 I Jog dial pulse input from the rotary encoder
83 ILL_IN I Illuminate line detect signal input terminal Not used
84 to 88 NCO - Not used
89 SA_DATA I/O IIC two-way serial data bus with the audio DSP
90 SA_CLK O IIC serial clock signal output to the audio DSP
91, 92 KEYACK0
, KEYACK1 I Acknowledge signal (wake up signal) input terminal
93 NCO - Not used
94, 95 KEYIN1, KEYIN0 I Front panel key input terminal
96 AVSS - Ground terminal (for A/D converter)
97 RC_IN0 I Rotary remote commander shift key input terminal
98 AVRH I Reference voltage (+3.3V) input terminal (for A/D converter)
99 AVDD - Power supply terminal (+3.3V) (for A/D converter)
100 LCD_CE O Chip enable signal output to the liquid crystal display driver
To Next Page
Loading...
