To Next PageTo Next Page
Need help?Do you have a question about the Sony CDX-M600R and is the answer not in the manual?
General| CD Playback | Yes |
|---|---|
| MP3 Playback | Yes |
| WMA Playback | Yes |
| USB Port | No |
| Bluetooth | No |
| Preset Stations | 30 |
| Display Type | LCD |
| Remote Control | Yes |
| Detachable Faceplate | Yes |
| Channels | 4 |
| EQ Settings | Yes |
| CD Text Display | Yes |
| ID3 Tag Display | Yes |
| Auxiliary Input | Yes |
| Power Output | 4 x 52 W |
| RMS Power Output | 22W x 4 |
| Tuner | FM/AM |
Guidance on handling moisture buildup inside the unit to ensure proper operation.
Information on handling discs to prevent playback issues and damage.
Advice on using an adapter for 8 cm CDs to protect the player.
Details on the compatibility and playback limitations of CD-R/RW discs.
Initializes the unit to factory settings before first use or after battery replacement.
Initial settings required for unit operation after reset or battery replacement.
Instructions for powering the unit on and completely off to prevent battery drain.
Explains navigation through the unit's menu system using buttons.
Details on how to manually set the 24-hour digital clock display.
Steps for inserting and playing a CD using the main unit directly.
How to play discs using an external CD/MD unit connected to the system.
How to cycle through display information like track number, disc name, and track name.
Enables automatic scrolling of disc/track names longer than 10 characters.
Instructions for skipping tracks using Automatic Music Sensor (AMS).
Guide to finding a specific point within a track using manual search.
How to select a specific disc from a connected CD/MD changer.
How to set the unit to repeat a single track or an entire disc.
Instructions for playing tracks randomly from a disc or multiple units.
How to assign personalized names (Disc Memo) to CDs for easier location.
Shows how to view the assigned disc memo information on the display.
Steps to delete previously assigned personalized names from CDs.
How to find and play a CD using its assigned custom name.
Allows selection of specific tracks to play or skip on a labeled disc.
Enables playing or skipping tracks based on 'Bank on' or 'Bank inv' settings.
Uses Best Tuning Memory (BTM) to automatically store strongest stations for each band.
Manual preset storage for up to 18 FM, 6 MW, and 6 LW stations.
How to recall and listen to previously stored radio stations.
Troubleshooting steps for when a preset station is not received properly.
Instructions to switch to monaural mode for improved stereo reception.
Introduction to Radio Data System services like programme retuning and traffic announcements.
How to show the RDS station name in the display.
Uses Alternative Frequencies (AF) to automatically switch to stronger signals of the same station.
Cycling through different display modes like AF, TA, and PTY status.
Keeps the unit tuned to regional programmes without switching to other stations.
Allows selection of local stations not stored on number buttons (UK only).
How to enable and listen to traffic announcements (TA) and TP signals.
Steps to cancel TA or turn off the function entirely.
Allows setting a preferred volume level for traffic announcements.
How the unit handles emergency announcements by switching sources.
Stores station data with AF/TA settings for automatic function activation.
Applies a single AF/TA setting to all memorized stations.
Allows individual AF/TA settings for each memorized station.
Tunes to stations based on selected programme types (PTY).
Automatically sets the unit's clock using RDS CT data during FM reception.
Introduction to Digital Audio Broadcasting technology and its features.
Covers searching for DAB ensembles, services, and manual tuning.
Detailed steps for automatic tuning to find DAB ensembles and services.
Guide to manually tuning in a specific DAB ensemble by channel number.
How to access DAB services that have been previously stored in memory.
Uses BTM to automatically assign DAB services to preset numbers.
Steps for manually storing or deleting DAB services in memory.
Overwrites existing preset DAB services with new ones.
Inserts new DAB services into the preset memory without overwriting.
Deletes DAB services from the preset memory.
Manual tuning procedure to listen to a specific DAB programme.
Explains how DAB ensemble lists are updated after BTM or tuning.
Adjusts audio reception settings like channel selection (Main/Sub) and DRC.
Tunes to DAB programmes based on selected programme types.
Selects and customizes equalizer curves for different music genres.
Chooses from preset EQ curves like Rock, Vocal, Groove, Techno, or Custom.
Fine-tunes equalizer frequencies and levels for desired sound.
Simulates natural sound fields by adjusting sound arrival time from speakers.
Accesses the Dynamic Soundstage Organizer (DSO) presets for ambient sound.
Chooses between DSO modes (Standard, Wide) or turns it off.
Balances sound output between left and right speakers.
Adjusts speaker output volume and cut-off frequency for front/rear speakers.
Controls the volume balance between front and rear speakers.
Sets the volume level for the connected subwoofer(s).
Filters out unwanted frequencies for clearer subwoofer sound.
Recalls saved DSO and EQ settings for each source automatically.
Attaches appropriate labels to the rotary commander based on mounting orientation.
Explains how to control the unit and optional CD/MD units with the rotary commander.
Details on using SOURCE and MODE buttons on the rotary commander.
Using the SEEK/AMS control for track location and station tuning.
Using the PRESET/DISC control for station recall and disc changes.
Using VOL, ATT, OFF, and DSPL buttons on the rotary commander.
Reverses control direction for rotary commander mounting on the right side.
Adjusts Bass, Treble, Balance, and Fader settings for the CDX-M600R.
Reduces volume temporarily for calls or other interruptions.
Customizes settings like clock, beep, language, dimmer, contrast, and display modes.
Enhances bass frequencies using the D-Bass function for powerful sound.
Displays sound signal levels using various spectrum analyser patterns or auto mode.
Information regarding the care and upkeep of the unit.
Instructions for safely replacing the unit's fuse.
Guide for replacing the remote control's CR2025 lithium battery.
Step-by-step instructions for removing the unit from its mounting.
Specific steps for dismounting the unit once the front panel is opened.
Procedure for accessing and removing the unit if the front panel is stuck.
Common issues and their solutions for the unit's general operation.
Troubleshooting specific problems related to CD and MD playback.
Solutions for problems encountered during radio tuning and reception.
Troubleshooting issues related to RDS functions like SEEK and traffic announcements.
Solutions for sound-related problems with DSP modes.
Explains error messages and their solutions for connected CD/MD units.
