– 15 – – 16 –– 13 – – 14 –
1
IC701 #¡
(RFO)
r
WAVEFORMS
1.2
±
0.2
Vp-p
VOLT/DIV : 200mV AC
TIME/DIV : 0.5µsec
4
IC702 #¡
(MNT3)
VOLT/DIV : 1V AC
TIME/DIV : 50µsec
2
IC702 @∞
(XPCK)
VOLT/DIV : 1V AC
TIME/DIV : 0.1msec
5
IC702 #™
(MNT1)
VOLT/DIV : 1V AC
TIME/DIV : 50µsec
3
IC702 @•
(RFCK)
VOLT/DIV : 1V AC
TIME/DIV : 50µsec
6
IC702 #∞
(XTAO)
VOLT/DIV : 0.2V AC
TIME/DIV : 50nsec
4.8Vp-p
242.0
µ
sec
5.3 Vp-p
140.5
µ
sec
5.3Vp-p
140.5
µ
sec
5.3 Vp-p
140.5
µ
sec
0.8 Vp-
16.9344 MHz
CFD-V10
r
Refer to page 2 for IC Block Diagrams.
r
SCHEMATIC DIAGRAM – CD SECTION –
Note on Schematic Diagram:
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1
/
4
W or less unless otherwise
specified.
Note: The components identified by mark ! or dotted
line with mark ! are critical for safety.
Replace only with part number specified.
• U : B+ Line.
• H : adjustment for repair.
• Power voltage is dc 9V and fed with regulated dc power
supply from battery terminal.
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : FM (Radio section), CD STOP (CD section)
PLAY (Tape section)
( ) : AM (Radio section), REC (Tape section)
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal produc-
tion tolerances.
• Circled numbers refer to waveforms.
• Signal path.
J : CD
• Abbreviation
KR : Korean
EA : Saudi Arabia
AUS : Australian
SP : Singapore
JE : Tourist
C&SA : Central and South America
To Next Page
Loading...
