– 7 –
SECTION 4
DIAL POINTER INSTALLATION
Note : Follow the installation procedure in the numerical order given.
1 Align the pointer with the groove of front cabinet and insert it as shown in the illustration.
2 Align knob (TU) with front cabinet and fasten the screw.
3 Turn the knob (TU) fully in the direction of the allow as shown in the illustration.
4Turn the tuning capacitor gear fully in the direction of the allow as shown in the illustration.
5 Fasten the front cabinet and rear cabinet with the screws.
1
Pointer
Knob (TU)
Front cabinet
2
Screw +BVTP (2.6x8)
5
3
Knob (TU)
Front cabinet
4
Tuning capacitor gear
Rear cabine
To Next Page
Loading...
