Sony CFS-515S - 3 Dial Pointer Installation

– 7 –
SECTION 3
DIAL POINTER INSTALLATION
Cabinet (Front)
Cabinet (Front)
Knob (Tune)
1 Pointer
a
c
b
Pointer
Marked line
2 – 1
2 – 2
6 Screw (+BTP 3x10
)
6 Screw (+BTP 3x10)
5 Screws (+BVTP 3x10)
Cabinet (Front)
4 Gear (Midway)
3 Gear (VC)
Chassis (Tune)
Tuner board
1 Set the pointer into the grooves of the cabinet
(Front) in the order of a, b and c.
2 Turn the knob (Tune) in the direction of the arrow,
then set the pointer by aligning it with the marked
line of the cabinet (Front).
3 Turn the gear (VC) fully counterclockwise.
4 Turn the gear (Midway) fully clockwise.
5 Mount the tuner board to the chassis and tighten
with screws.
6 Mount the chassis (Tune) to the cabinet (Front) and
tighten with screws.
Note : Follow the installation procedure in the numerical order given.