13
GB
Tuner
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 11).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press PLAY MODE/TUNING MODE
repeatedly until “PRESET” appears.
3 Slide the knob to – or to + repeatedly to
select the desired preset station (or
RDS station name*).
* European model only.
Listening to a non-preset
radio station
— Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press PLAY MODE/TUNING MODE
repeatedly until “PRESET” and “AUTO”
disappear.
3 Slide the knob to – or to + repeatedly to
tune in the desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
REPEAT/FM MODE repeatedly until “MONO
MODE” appears. There will be no stereo effect, but
the reception will improve.
• To tune automatically, press PLAY MODE/
TUNING MODE repeatedly until “AUTO” appears
in step 2 above, then slide the knob to l or to
L. The frequency indication changes and
scanning stops when the system tunes in a station
(Automatic Tuning).
To Next Page
Loading...
