12
AM antenna
For the AM antenna, use a 6- to 15-meter (20- to
50-foot), horizontally extended insulated wire,
with one end connected to the AM ANTENNA
terminals as shown below. Leave the supplied AM
bar antenna connected.
U
Important
If you connect an external antenna, connect a ground
wire to the U terminal with a screw clamp. To avoid
causing a gas explosion, do not connect the ground
wire to a gas pipe.
Connecting optional components
(continued)
Insulated wire
(not supplied)
AM bar antenna
Screw
clamp
Ground wire (not supplied)
To Next Page