Sony CMT-GP5 - Optional Components; Hooking up Optional Components

Optional Components
17
GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A MD IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
Listening to audio from a
connected component
1
Connect audio cords.
See “Hooking up optional components” on
page 17.
2
Press MD.
Start playing the connected component.
Recording audio from a
connected component
1
Connect audio cords.
2
Start recording manually.
See “Recording on a tape manually” on
page 12.
Optional Components
Hooking up optional components
From the audio
output jacks of an
optional analog
component
Optional analog component