COM-2.US.3-213-855-11(1)
146
146
Connect the unit to the computer with the supplied USB cable.
To
(USB)
connector
USB cable (supplied)
While the unit is connected to the computer, a screen showing the USB
connection mode appears.
After the transfer finishes, make sure the unit does not display “Do Not
Disconnect,” and then use the safely remove hardware function of the computer
before disconnecting the USB cable from the unit and computer.
Notes
While the unit is connected to the computer, operations on the unit do not work.
Do not disconnect the USB cable while text files are being transferred.
Do not take out the batteries while the unit is connected to a computer via the USB cable.
Doing so may damage data stored on the unit.
Connecting the unit via a USB hub may not work and is not supported. Connect the USB
cable directly to the computer.
Transfer text files (.txt) by dragging and dropping them to the unit in Windows
Explorer.
To transfer text files, start Windows Explorer, then drag and drop files to the
“DOCUMENT” folder that appears on the top level of mylo’s file system.
Both the internal memory and “Memory Stick Duo” (if one is inserted into the unit) appear
separately as removable disks when the unit’s USB mode is set to “MSC.”
Notes
When transferring text files to a “Memory Stick Duo,” create a folder named “DOCUMENT”
under the “Memory Stick Duo” top level folder using Windows Explorer before dragging and
dropping.
The unit can open files with file name extension “.txt” as text files.
Continued
To Next Page
Loading...
Need help?
General