Sony CPD-101VS - Adjusting the Picture Size; Adjusting the Picture Centering; Adjusting the Geometry; Selecting the Color Temperature

1-5
22
Adjustments
2. Press the ?// buttons to adjust the picture brightness.
/ for more brightness
? for less brightness
To exit the OSD
Press the MENU button again.
✎ Tip
If you don’t touch any buttons the OSD automatically disappears after 30 seconds.
Adjusting the picture centering
The adjustment data becomes the individual setting for each input signal
received.
1. Select CENTER in the MENU OSD and press the MENU button.
The CENTER OSD appears.
2. For vertical adjustment For horizontal adjustment
Press the >/. buttons. Press the ?// buttons.
> to move up / to move right
. to move down ? to move left
To exit the OSD
Press the MENU button again.
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT EXIT ZOOM
GEOM SIZE OPTION
CENTER
26
73
23
Adjustments
✎ Tip
If you don’t touch any buttons, the OSD automatically disappears after 30 seconds.
Adjusting the picture size
The adjustment data becomes the individual setting for each input signal
received.
To adjust the picture size in horizontal and vertical direction
proportionally
1. Select ZOOM in the MENU OSD and press the MENU button.
The ZOOM OSD appears.
2. Press the ?// buttons for the best size.
To adjust the picture size in horizontal or vertical direction
1. Select SIZE in the MENU OSD and press the MENU button.
The SIZE OSD appears.
Continued to the next page ➔
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT EXIT ZOOM
GEOM SIZE OPTION
ZOOM
H
V
74
49
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT EXIT ZOOM
GEOM SIZE OPTION
SIZE
26
73
24
Adjustments
2. For vertical adjustment For horizontal adjustment
Press the >/. buttons. Press the ?// buttons.
> to increase / to increase
. to decrease ? to decrease
To exit the OSD
Press the MENU button again.
✎ Tip
If you don’t touch any buttons, the OSD automatically disappears after 30 seconds.
Adjusting the geometry
The rotation adjustment data becomes the common setting for all input
signals. All other data becomes the individual setting for each input
signal received.
1. Select GEOM in the MENU OSD and press the MENU button.
The GEOMETRY OSD appears.
2. Press the >/. buttons to select the item you want to adjust.
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT EXIT ZOOM
GEOM SIZE OPTION
GEOMETRY
ROTATION
26
25
Adjustments
3. Press the ?// buttons to adjust.
ROTATION / to rotate the picture
clockwise
PINCUSHION / to bend both
sides outward
PIN BALANCE / to bend both sides
to the right
KEYSTONE / to widen the top
KEY BALANCE / to move the top to
the right
To exit the OSD
Press the MENU button again.
✎ Tip
If you don’t touch any buttons, the OSD automatically disappears after 30 seconds.
Selecting the color temperature
The selected color temperature becomes the common setting for all input
signals.
1. Select COLOR in the MENU OSD and press the MENU button.
The COLOR OSD appears.
? to rotate
counterclockwise
? to bend inward
? to the left
? to shrink the top
? to the left.
Continued to the next page ➔
MENU
COLOR
MENU
OK
CENTER SCREEN
BRIGHT EXIT ZOOM
GEOM SIZE OPTION
COLOR
11000K
9300K
6500K
5000K