What to do if my Sony Monitor says NO SIGNAL?
Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets. Also, ensure the INPUT switch setting is correct and inspect the video input connector’s pins for any bending or pushing in.
Why is my Sony CPD-G420S Marketing picture flickering?
Try to isolate and eliminate any potential sources of electric or magnetic fields such as other monitors, laser printers, fluorescent lighting, televisions, or electric fans. Also, move the monitor away from power lines or place a magnetic shield near it. Try plugging the monitor into a different AC outlet, preferably on a different circuit or try turning the monitor 90° to the left or right.
Why is the color on my Sony CPD-G420S Marketing not uniform?
Try degaussing the monitor. If you have equipment that generates a magnetic field, such as a speaker, near the monitor, or if you change the direction the monitor faces, color may lose uniformity.
How to fix ghosting on Sony Monitor?
Eliminate the use of video cable extensions and/or video switch boxes. Also, check that all plugs are firmly seated in their sockets.
How to fix red and blue shadows on Sony Monitor?
Adjust the convergence.
Why does my Sony Monitor have no picture?
First, ensure the power cord is securely connected. Next, verify that the power switch is in the “on” position.
How to fix a fuzzy picture on my Sony Monitor?
Try adjusting the contrast and brightness settings. You can also degauss the monitor. Additionally, adjust the degree of moire cancellation until the moire is minimal, or set CANCEL MOIRE to OFF.
What does it mean if my Sony Monitor says OUT OF SCAN RANGE?
Verify that the video frequency range is within the specifications for the monitor. Alternatively, reconnect your old monitor and adjust the frequency range to Horizontal: 30 – 110 kHz and Vertical: 48 – 170 Hz.
How to fix wavy pattern on Sony Monitor?
Adjust the degree of moire cancellation until the moire is minimal.
Why does my Sony Monitor hum when I turn it on?
This is the sound of the auto-degauss cycle. When the power is turned on, the monitor is automatically degaussed for a few seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.
General| Screen Size | 19 inches |
|---|---|
| Display Type | CRT |
| Max Resolution | 1600 x 1200 |
| Refresh Rate | 85 Hz |
| Dot Pitch | 0.24 mm |
| Aspect Ratio | 4:3 |
| Horizontal Refresh Rate | 30 - 96 kHz |
| Vertical Refresh Rate | 50 - 160 Hz |
| Input Signal | Analog RGB |
| Power Consumption Operational | 120 W |
| Input Connectors | 15-pin D-sub |
| Viewable Size | 18.0 inches |
Includes warnings, FCC notice, and declarations for safe operation.
Guidelines for proper installation, cleaning, and transportation.
Identifies front controls and rear connections with pinout details.
Instructions for connecting the monitor to IBM PC/AT or Macintosh computers.
Steps for power connection, turning on, and resolving no-picture errors.
How to set menu language, select input, and manage audio.
How to use the menu system for picture adjustments and reset.
How to select preset picture effect modes for different applications.
How to adjust brightness, contrast, size, and centering of the picture.
How to auto-adjust picture and modify its shape (geometry).
How to adjust convergence and degauss/cancel moire.
How to adjust color temperature and select color modes like EASY, PRESET, EXPERT, sRGB.
Detailed setup for EASY, PRESET, EXPERT, and sRGB color modes.
How to restore image quality and configure options like control lock and OSD position.
How to reset settings and information on the power saving function.
Explains damper wires, NO SIGNAL, OUT OF SCAN RANGE, and how to display monitor info.
Steps to resolve no picture, signal loss, flickering, or scrambled images.
Remedies for ghosting, centering, shape, color uniformity, button, and feature malfunctions.
How to use self-diagnosis and details of monitor specifications.
Information on TCO'99 approval, environmental benefits, and requirements.
Details on restrictions for flame retardants, heavy metals, and CFCs.
To Next Page
