20
Operating the Drive
Ejecting the Disc
To eject the disc, press the eject button on the front panel. The tray
comes out automatically.
Note:
The eject button does not work if it is disabled by the software you
are using.
■ Opening the tray manually in an emergency
You can open the tray manually when it fails to come out by means
of the eject button or software commands. To do this, follow the
procedure below:
1 Turn off the power of your computer.
2 Insert a pointed object, such as a paper clip, into the emergency
eject hole and push.
After removing a disc from the drive unit, consult your dealer or
qualified service personnel.
Approx. 40 mm
To Next Page
Loading...
