Need help?Do you have a question about the Sony CDU311 and is the answer not in the manual?
Identifies the drive as a Class 1 Laser Product and notes the label location on the drive.
Lists registered trademarks of various companies relevant to the product.
Details the general, supported disc format, performance, and audio features of the CDU311 drive.
Specifies the necessary device driver and MSCDEX or equivalent for accessing CD-ROM discs.
Lists required components for using the CD-ROM drive unit with a computer system.
Identifies and describes the functions of the front panel components like disc drawer, jacks, and indicators.
Connects to the host computer's ground cables when the drive's frame is not in direct contact.
Outputs analog audio signals.
Jumpers for drive configuration, refer to page 11 for details.
Connects to the IDE host adapter using a connecting cable.
Connects to the power supply of the host computer.
Guidance on avoiding adverse environmental conditions and proper power cable connection.
Advice on handling the drive during operation and avoiding temperature change impacts.
Recommendations for moving the drive, including closing the drawer and using original packaging.
Lists necessary tools and parts for installation and initial computer preparation steps.
Instructions on setting drive jumpers for master/slave configuration or CSEL selection.
Details the power input connector and its pin assignment, including a caution for improper connection.
Procedure for installing the CD-ROM drive driver for MS-DOS 6.X systems.
Guides for installing the CD-ROM drive driver under Windows 95.
Step-by-step instructions on how to turn on the computer and insert a disc into the drive.
Procedure for manually opening the disc drawer using the emergency eject hole.
Instructions on how to lock and unlock the disc locks for vertical drive positioning.
Lists general specifications including host interface, disc compatibility, and rotational speeds.
Details data transfer rates, burst rates, and access times for the drive.
Specifies the read error rate for the drive under different error correction modes.
Provides specifications for audio output levels on line out and headphone jacks.
Specifies housing and pin details for the DC input connector.
Specifies details for the interface connector.
Specifies details for the audio out connector.
Specifies the type of laser used in the drive.
Specifies the wave length of the laser.
Specifies the output power of the laser.
Specifies the beam divergence of the laser.
Identifies the drive as a Class 1 Laser Product and notes the label location on the drive.
Lists registered trademarks of various companies relevant to the product.
Details the general, supported disc format, performance, and audio features of the CDU311 drive.
Specifies the necessary device driver and MSCDEX or equivalent for accessing CD-ROM discs.
Lists required components for using the CD-ROM drive unit with a computer system.
Identifies and describes the functions of the front panel components like disc drawer, jacks, and indicators.
Connects to the host computer's ground cables when the drive's frame is not in direct contact.
Outputs analog audio signals.
Jumpers for drive configuration, refer to page 11 for details.
Connects to the IDE host adapter using a connecting cable.
Connects to the power supply of the host computer.
Guidance on avoiding adverse environmental conditions and proper power cable connection.
Advice on handling the drive during operation and avoiding temperature change impacts.
Recommendations for moving the drive, including closing the drawer and using original packaging.
Lists necessary tools and parts for installation and initial computer preparation steps.
Instructions on setting drive jumpers for master/slave configuration or CSEL selection.
Details the power input connector and its pin assignment, including a caution for improper connection.
Procedure for installing the CD-ROM drive driver for MS-DOS 6.X systems.
Guides for installing the CD-ROM drive driver under Windows 95.
Step-by-step instructions on how to turn on the computer and insert a disc into the drive.
Procedure for manually opening the disc drawer using the emergency eject hole.
Instructions on how to lock and unlock the disc locks for vertical drive positioning.
Lists general specifications including host interface, disc compatibility, and rotational speeds.
Details data transfer rates, burst rates, and access times for the drive.
Specifies the read error rate for the drive under different error correction modes.
Provides specifications for audio output levels on line out and headphone jacks.
Specifies housing and pin details for the DC input connector.
Specifies details for the interface connector.
Specifies details for the audio out connector.
Specifies the type of laser used in the drive.
Specifies the wave length of the laser.
Specifies the output power of the laser.
Specifies the beam divergence of the laser.
General| Brand | Sony |
|---|---|
| Model | CDU311 |
| Category | CD/CDR Drive |
| Language | English |
To Next Page
