Need help?Do you have a question about the Sony CDU-541 and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | CDU-541 |
| Category | CD/CDR Drive |
| Language | English |
Details operating conditions like power-on, reset, and unit attention.
Defines the structure and fields of the Command Descriptor Block.
Explains how commands are processed and terminated.
Describes the MESSAGE IN and MESSAGE OUT phases.
Details the status byte and its descriptions.
Explains the disconnect and reselect mechanisms.
Lists compatible disc standards and types.
Outlines the procedure for recovering Table of Contents data.
Specifies rules for audio playback operations.
Describes the physical and logical model of the CD-ROM drive.
Lists and details all implemented SCSI commands.
Requests device parameters and capabilities.
Allows the initiator to set device parameters.
Allows the initiator to retrieve device parameters.
Requests the target to start/stop the current audio play operation.
Requests the target play audio starting at a specified address.
Requests the controller enable or disable caddy removal.
Transfers data from the drive to the initiator.
Requests information about the disc's capacity.
Requests the Table of Contents data.
Retrieves error information after a CHECK CONDITION status.
Requests controller to enable or disable the logical unit.
Checks if the logical unit is in the ready condition.
Details the various MODE SELECT/SENSE pages.
Configures read error recovery settings.
Configures verify error recovery settings.
Defines CD-ROM specific parameters like addressing mode.
Sets audio playback parameters.
Describes MODE SENSE pages, similar to MODE SELECT pages.
Lists additional sense codes for error reporting.
Provides definitions for CD-ROM related terms.
To Next Page
